Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54).
Configurable and airtight supply and exhaust spigots, suitable for horizontal installation.

Applications
Commercial premises, offices, restaurants, public buildings, schools.

CADB/T-HE D ECOWATT
Heat recovery units without additional incorporated heater.

CADB/T-HE DC ECOWATT
Heat recovery units with built-in low pressure hot water coil.

CADB/T-HE DI ECOWATT
Heat recovery units with built-in electric heater battery.

The 3-Way valve is provided as an accessory (see accessories table for this series)

Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F.

Fans
Plug-fan with backward curved impeller.
All fans installed in CADB/T- HE ECOWATT models, comply with the efficiency requirements of the ErP Directive.

Filters
– F7: Low pressure F7 filters for supply air.
– M5: M5 filters for extract air.

Additional information
Single phase (CADB-HE) and three phase models (CADT-HE).
Airflows from 400 to 5400 m3/h at 150 Pa of static pressure available.All versions and models include by-pass. Mounting flexibility provided by the interchangeable side panels.

CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).