Description
Range of single inlet direct driven centrifugal fans designed for the continuous extraction of air stream up to 120ºC (1).
The casings are manufactured from one piece die cast aluminium and finished with a tough, grey colour, epoxy-polyester paint coating.
All models incorporate radial centrifugal impellers manufactured from die cast aluminium and finished in a red colour epoxy-polyester paint finish.
Available with motors in 2 poles.
(1) Models CBT-125,160 and 170: up to 80ºC.
CSB Models: up to 70ºC.
The casings are manufactured from one piece die cast aluminium and finished with a tough, grey colour, epoxy-polyester paint coating.
All models incorporate radial centrifugal impellers manufactured from die cast aluminium and finished in a red colour epoxy-polyester paint finish.
Available with motors in 2 poles.
(1) Models CBT-125,160 and 170: up to 80ºC.
CSB Models: up to 70ºC.
Motors
All motors are IP55 class F (1), with ball bearings greased for life.
Electrical supply:
-Single phase 230V-50Hz.
-Three phase 230/400V-50Hz and 400V-50Hz.
(1) Models CSB and CBT-40: IP44, class B and equipped with thermal protection.
Additional information
The scroll can be orientated (1) in 7 different positions as per the table below. Standard supplied position: LG270.
(1) CSB and CST Models: only can be supplied in LG270 position.The CBT-160 model includes PTC probe.
On request
2 speed motors.
ATEX versions
On request, explosion proof versions in accordance to ATEX Directive for three phase models. For ambient working temperatures from -20ºC to +40ºC.- ATEX Flameproof -Gas:
Except CBT-40 and CST-60 models
II 2G Ex d IIB T4
II 2G Ex d IIB+H2 T4 (with Ex d IIC T4 motor)
– ATEX Increased safety-Gas:
Only CBT-100 and CBT-130 models
II 2G Ex e II T3
-ATEX Dust
Suspended flammable particles and nonconductive dust:
II 3D Ex tc IIIB T125ºC
Conductive dust:
II 3D Ex tc IIIC T125ºC (with IP65 motor)
To select CBT-N refer to performance curves, or Easyvent.
The consumption data of ATEX products may vary from the data shown in technical characteristic charts.
On request, explosion proof versions in accordance to ATEX Directive for three phase models. For ambient working temperatures from -20ºC to +40ºC.- ATEX Flameproof -Gas:
Except CBT-40 and CST-60 models
II 2G Ex d IIB T4II 2G Ex d IIB+H2 T4 (with Ex d IIC T4 motor)– ATEX Increased safety-Gas:
Only CBT-100 and CBT-130 models
II 2G Ex e II T3-ATEX Dust
Suspended flammable particles and nonconductive dust:
II 3D Ex tc IIIB T125ºCConductive dust:
II 3D Ex tc IIIC T125ºC (with IP65 motor)To select CBT-N refer to performance curves, or Easyvent.
The consumption data of ATEX products may vary from the data shown in technical characteristic charts.
-
Tough casing design
Scroll made in one piece aluminium die casting. -
Impellers dynamically balanced
Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard, providing vibration free operation.
English
Français
Reviews
There are no reviews yet.