Range of adjustable pitch aerofoil blade, axial flow cabinet fans.Fan casing manufactured from heavy gauge galvanised sheet steel internally lined with 25 mm thickness fireproof fibreglass acoustic insulation (M0).
All models incorporate separate high grade diecast aluminium blades locked within a pressed sheet steel hub.Motors
Available, depending upon the model:

• – with three phase motors in 4 or 6 poles.
• – with three phase two speed motors 4/8 or 6/12 poles.

All the motors are IP55, Class F insulation.
Electrical supplies:

• Three phase 220-240/380-415-50/60* Hz up to 3 kW.
  (*Check Easyvent for 60Hz available models)
• – Three phase 380-415V-50Hz, for higher power motors and two speed motors.
  (See characteristics chart).

Additional Information
Standard air direction: form (A) configuration (Motor over Impeller).

On request
Air direction: form (B) configuration (Impeller over Motor).
Single phase motors 230-50Hz up to 2,2kW.
Motors with PTC.

Range of adjustable pitch aerofoil blade, axial flow cabinet fans designed for smoke extraction in fire conditions and certified F400-120 and F300-120 (CE marked).
Fan casing manufactured from heavy gauge galvanised sheet steel internally lined with 25mm thickness fireproof fibreglass acoustic insulation (M0).
All models incorporate separate high grade diecast aluminium blades locked within a pressed sheet steel hub.

Motors
Available, depending upon the model:
– with three phase motors in 4 or 6 poles.
– with three phase two speed motors 4/8 or 6/12 poles.
F400-120 and F300-120 motors are IP55 class H insulation.
Electrical supplies:Three phase 230/400V-50Hz up to 3 kW.
Three phase 400V-50Hz, for higher power motors and two speed motors.
(See characteristics chart).
Additional Information
Standard air direction: form (A) configuration (Motor over Impeller).

Capture, extraction and filtration of pollutants and heat in commercial or collective kitchens.
Single backed or double central.
Single modules of length 1000, 1500, 2000, 2500 and 3000 mm.
Without visor or with depth of 1000, 1250, 1500 or 1750 mm.
Height of 400 mm and 500 mm.
Constant hood height for a maximum capture volume.
Self-supporting construction without visible attachment or sharp edges for cleaning without risk of injury.
Side reinforcement, 15/10mm galvanized steel, height 50mm, integrated into the hood, ensuring the rigidity of the assembly.
Setting the level from inside the hood and clip-in fastener caps.
Braced at sensor end for rigid join between two modules, while allowing a large air passage.

Visible faces austenitic stainless steel AISI 304 (1.4301) with a brushed finish SB.
– Central hoods assembled back to back using two hoods backed with partitions.
– Sides without obvious elements such as rivets and studs.
– Rear and upper surfaces in galvanized steel.
– Standard filter galvanized material, stainless steel frame M0397x472x25 mm.
– Stainless steel closure plate.
– Peripheral gutter.
– Drain with stainless steel – threaded plug Gas 1/2.

Packaging: Packaged on pallet in heat-shrink film.

On request
– Rear assembly plate without visible screws and top panel in stainless steel.
– Longer and special lengths available.
– Accessories (ring plate, balancing guillotine damper, waterproof light etc.).
-Motorised hoods, laundries, ovens, comfort, comfort 90/10, 30 to 60% induction, closed filter ceilings, modular ceilings etc.

Range of direct drive backward curved centrifugal cabinet fans designed for ventilation of commercial kitchens and industrial applications.
Cabinet fan manufactured from aluminium profiles and double thickness side panels internally lined with 25 mm thickness of fireproof fiberglass acoustic insulation.
Circular duct connection flange on the inlet and outlet. CVAB-N/CVAT-N incorporates direct drive backward curved centrifugal impeller,manufactured from aluminium (CVAB-N) or steel (CVAT-N) sheet, with motor fitted inside the air stream.

Motors
CVAB-N
Single-phase external rotor motors 230V 50Hz, IP55, class F, with thermal protection, speed controllable by tension.
Working temperature from -40ºC to 60ºC.

CVAT-N
Three-phase 4 and 6 pole motors 230/400V 50Hz, IP55, class F, with thermal protection (PTC), speed controllable by inverter.
Working temperature from -20ºC to 40ºC.

Acoustic cabinet fans, hermetic and selfcleaning, manufactured from galvanised sheet steel and internally lined with 25mm thickness of fireproof acoustic fiberglass insulation (M0), direct drive backward curved centrifugal impeller, dynamically balanced.
Brushless EC motor with high efficiency and low consumption, supply 230V +/- 10%- 50/60Hz, IP44, ball bearings and thermal protection.
Adjustable speed 100% by potentiometer located in the terminal box or by external control type REB-ECOWATT. Analogue input signal 0-10V to control the fan. Working temperature from -20ºC to 40ºC.

Range of forward curved belt drive cabinet fans designed for smoke extraction in fire conditions and certified F400-120 (CE marked). The casings are manufactured from galvanised sheet steel. Internally lined with 7 mm thickness of melamine thermo- acoustic insulation. All models incorporate a single inlet low pressure centrifugal fan mounted on anti-vibration mounts and flexible coupling at the discharge. Supplied as standard in horizontal discharge (code H) configuration with motor, pulley and belt assembly on the left hand side of the unit when viewed from the discharge outlet (code CW).

Motors
All motors are IP55, class F insulation.
Electrical supply:
Three phase 220-240/380-415-50/60*Hz, up to 3 kW.
(*Check EasyVent for 60Hz available models)
Three phase 380-415V-50Hz, for higher motor powers and two speed motors.
(See characteristics chart).
All motor above 3 kW are mounted onto an adjoining support frame.
All three phase motors are speed controllable by frequency inverter.

Other versions on request
The belt-driven assembly can be supplied at the right hand side of the unit (code CCW).
Vertical discharge (code V) configuration.
Two speed motors (4/8 and 4/6 poles).
Single phase motor (CVSB) up to 2,2 kW.

Cabinet fans for smoke extraction certified F400-120. Cabinet fans manufactured from galvanised sheet steel and protected against corrosion.
Internally lined with 7 mm thickness of melamine acoustic foam insulation (M1).
All models are fitted with forward curved centrifugal impellers.

Motors
All motors are IP55, class F insulation.
Available, depending upon the model, with three phase motors in 4 or 6 poles.
Electrical suply:Three phase230/400V-50Hz, up to 3 kW.
400V-50Hz, for higher motor powers.
(See characteristichs chart).
On request
Two speed motors.

Range of belt driven cabinet fans designed for smoke extraction in fire conditions and certified F400-120 (CE marked). The casings are manufactured from heavy gauge galvanised sheet steel. All models incorporate double inlet forward curved centrifugal impellers.
Belt-driven transmission system mounted external to the air stream. Motor mounted within the fan cabinet onto a specific support giving optimal belt tension.
Supplied as standard in horizontal discharge (code H) or vertical (code V) configuration with motor, pulley and belt assembly on the right hand side of the unit when viewed from the discharge end.

Motors
All motors are IP55, class F insulation.
Electrical supply:Three phase230/ 400V-50Hz, up to 3 kW.
400V-50Hz, for higher motor powers.
On request
Motor, pulley and belt assembly fitted on the left hand side of the unit when viewed from the discharge end (TI version).Two speed motors (4/8 and 4/6 poles).
Single phase motors 230V-50Hz up to 2,2 kW.
Single phase motor (CVHB) up to 2,2 kW.

Range of forward curved belt drive cabinet fans manufactured from galvanised steel sheet, internally lined with melamine acoustic insulation (M1). All models incorporate a double inlet low pressurecentrifugal fan mounted on anti-vibration mounts and flexible coupling at the discharge. Supplied as standard in horizontal discharge (code H) configuration with motor, pulley and belt assembly on the right hand side of the unit when viewed from the discharge end.

Motors
All motors are IP55, class F insulation.
Electrical supply:
– Three phase 220-240/380-415-50/60* Hz up to 3 kW.
(*Check Easyvent for 60Hz available models)
– Three phase 380-415V-50Hz, for higher power motors and two speed motors.
(See characteristics chart)
– Single phase 230V-50Hz, with a maximum of 1,5 kW (CVTB version).
All motor up to 2,2 kW are mounted onto the fan casing scroll.
All motor above 3 kW are mounted onto an adjoining support frame.
All three phase motors are speed controllable by frequency inverter.

On request
The belt-driven assembly can be supplied at the left hand side of the unit (TI version), Vertical discharge (code V) configuration.
Models fitted with circular inlet flanges.
Double thickness (double skin) panels with acoustic fireproof insulation (M0) of 17mm thickness fiberglass.
Two speed motors (4/8 and 4/6 poles).

Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the inlet.
KABB / KABT incorporates direct driven aluminium backward curved centrifugal impeller with motor fitted outside of the air stream.
Supplied with galvanized drip tray and copper drain.

Motors
– KABB: Single-phase 4 pole motor 230V-50Hz, IP55, class F, with thermal protection, speed controllable by tension.
Maximum temperature around the motor:
KABB/4-3000/315: 70ºC
KABB/4-4000/355: 50ºC
KABB/4-6000/450: 40ºC

– From KABT/4-3000/315 to KABT/4-9000/500:
Three-phase 4 pole motor 230/400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.

– KABT/4-12000/560:
Three-phase 4 pole motor 400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.

Additional information
Working temperature from -20ºC to 100ºC.