Area system of simultaneous detection of CO and NO2 in the same module line, which allows controlling up to 16 detectors with possibility of programming up to 2 groups , allowing individual manoeuvres in case of different gases or sectorised manoeuvres if they are the same gas.
Each detector is individually monotorised, showing on the display its status in real time.
Expandable from one to four areas completely independent.
It incorporates the Spanish and Portuguese regulations.
Programmation in English, Spanish and Portuguese.

Area system of simultaneous detection of CO and NO2 in the same module line, which allows controlling up to 16 detectors with possibility of programming up to 2 groups , allowing individual manoeuvres in case of different gases or sectorised manoeuvres if they are the same gas.
Each detector is individually monotorised, showing on the display its status in real time.
Expandable from one to four areas completely independent.
It incorporates the Spanish and Portuguese regulations.
Programmation in English, Spanish and Portuguese.

Specific CO detector, using semiconductor technology, specifically developed for Conventional CO Detection Panel.
In accordance to UNE 23300/84.

CPFL
Presence detector for ceiling mount, sensitive to infrared radiation emitted by bodies in movement, with a 360º detecting angle.
Power supply: 1-230 V.

CPFL-S: Surface model.
CPFL-E: Flush mount model.

Motorised dampers open proportionately and is controlled by the EAS control module.
Power supply: 24 VAC or 24 VD, depending on the models.

Programming console specific for ECOWATT PLUS series. Allows user selection and adjustment of any operating mode: constant pressure (COP), constant airflow value (CAV), variable air value (VAV) and minimum-maximum.
It includes an RJ45 cable of 1 meter length for connection to the fan.

Motorised dampers for the twin-flow system. Minimum / maximum opening.
Controlled by a presence detector acting on the motor of the damper.
Power supply: 1-230 V.

Control element for ECOWATT fans with DC brushless motor. It allows control via signal from an analogue output 0-10V depending of the status of three digital inputs free of power. Before each change of digital signal, it can be attributed a voltage output value between 0 and 10V.

Mode of operation:
1. Remote ON/OFF with two speed switch.
2. Up to three switch speeds taking as output the most unfavorable value.

Electronic unit specific for ECOWATT PLUS series. Allows user configuration of schedules with up to three daily slots, in addition to the holiday period.
The programing console PROSYS ECOWATT is also necessary.

Applications
Control of exhaust, supply and impulse fans for high and low pollution ventilation (comfort mode) and emergency smoke extract modes.
Fully compatible with pollution and fire detection systems. Ability to operate with internal clock (optional).
Operates at high and low speed (HS/LS) in pollution ventilation mode and at high speed in emergency smoke exhaust mode.
Three-phase 400V 2-speed motor control (Dahlander or independent windings) – motor (s) or just 1 speed, please consult us.
5 sizes of cabinets.
8 Sizes: 9/18/26/32/50/65/75 and 95A per motor.
Control unit for 1 motor with 2 speeds from 9 to 95A. Control unit for 2 motors with 2 speeds from 9 to 26A.
2 versions:
– “Master” unit for managing Comfort /Smoke exhaust fan, with or without clock.
– “Slave” unit to be controlled by a “Master”unit (control supply fans and jet fans). Power supply three phase 400V-50/60Hz + Earth.

Description
IP55 sealed enclosure, RAL 7035 colour.
Supplied with cable glands. Cut-off switch included in the facade (can be padlocked in 3 points) Integrated magnetic protection:
– Version for 1 motor 32 to 95A.
– Version for 2 motors 9 to 26A.
Integrated thermal protection (connected only in the comfort mode). Taking into account operational priorities: LS/HS comfort, smoke extraction, fire services switch.
Pollution ventilation input to connect either specific two-speed controller or pollution detection system.
Fire emergency input to connect specific fire emergency detection system.
Master version:
– Control devices indicator and operation display on the front.
– 24V low voltage for the power supply for external box units.