Whole house heat recovery unit with a high-efficiency heat exchanger up to 92% with constant airflow setting, very low consumption EC motor and low sound level.
Provides a constant supply of fresh tempered air into the living spaces of a home whilst extracting condensation, smells and smoke from kitchens, bathrooms and toilets.
The central unit is completed with extraction outlets located in different rooms (kitchen, toilets, bathroom) and inlets located in the main rooms (dining room, bedrooms).

Features
-2 constant flow fans.
-Counter-flow heat exchanger with up to 92% performance.
-Wireless remote control.
-Wireless kitchen boost.
-F5 inlet filter with G4 pre-filter.
-G4 extraction filter.
-100% summer by-pass option for free cooling.
-4 nozzles, Ø 150/160 mm.
-1 drain for vertical fitting.
-1 antenna with potential transmission/reception range of 150 metres in a open space.
-1 wall bracket.
-Air tight construction.

Heat recovery unit with an aluminium heat exchanger offering up to 92% efficiency which provides a constant air change in the building. The casing is manufactured from a frameless construction with double skinned mineral wool insulated panels. All units are equipped with high efficient filters for good air quality. Plug fans with backward curved impeller and EC external rotor motor ensures low energy consumption. Free cooling is provided by 100% by-pass during summertime.
The integral controls offer Plug & Play.
Sensors as CO2 or RH are also available as accessories to provide Demand Controlled Ventilation.
The units are designed for indoor installation.
Vertical unit:
– Casing (outer and inner skin) coated in RAL 9003 (white).
– Panels 25mm thick.
– Supply and exhaust air filter M5.
– Nozzles Ø160mm.
-PH models with built-in pre-heater for cold climates.

Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54).
Configurable and airtight supply and exhaust spigots, suitable for horizontal installation.

Applications
Commercial premises, offices, restaurants, public buildings, schools.

CADB/T-HE D ECOWATT
Heat recovery units without additional incorporated heater.

CADB/T-HE DC ECOWATT
Heat recovery units with built-in low pressure hot water coil.

CADB/T-HE DI ECOWATT
Heat recovery units with built-in electric heater battery.

The 3-Way valve is provided as an accessory (see accessories table for this series)

Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F.

Fans
Plug-fan with backward curved impeller.
All fans installed in CADB/T- HE ECOWATT models, comply with the efficiency requirements of the ErP Directive.

Filters
– F7: Low pressure F7 filters for supply air.
– M5: M5 filters for extract air.

Additional information
Single phase (CADB-HE) and three phase models (CADT-HE).
Airflows from 400 to 5400 m3/h at 150 Pa of static pressure available.All versions and models include by-pass. Mounting flexibility provided by the interchangeable side panels.

CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).

Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 48mm in Outdoor versions (Models 40 and 54).

Configurable and airtight supply and exhaust spigots, suitable for horizontal installation.

Applications
Commercial premises, offices, restaurants, public buildings, schools.

CADB/T-HE D PRO-REG
Heat recovery units without additional incorporated heater.

CADB/T-HE DI PRO-REG
Heat recovery units with built-in electric heater battery.

CADB/T-HE DC PRO-REG
Heat recovery units with built-in low pressure hot water coil.

The 3-Way valve is provided as an accessory (see accessories table for this series)

Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B.
Models 40 and 54: Three phase motors, IP55,Class F.

Fans
Plug-fan with backward curved impeller.
All fans installed in CADB/T- HE PRO-REG models, comply with the efficiency requirements of the ErP Directive.

Filters
– F7: Low pressure F7 filters for supply air.
-M5: M5 filters for extract air.

Control
It includes manual or automatic control for modes: adjustable airflow (VAV), constant pressure (COP) or constant airflow (CAV), via CO2, pressure or airflow sensors (accessories).
Post-heating stage versions (-DI/-DC) allow post-heating management depending on the temperatures taken by the temperature probes incorporated in the design.

Ranges of product according to the type of operating control:
VAV- variable air volume
Fan speed can be adjusted with a 0 – 10V signal from the remote touchscreen panel (included) or an external CO2, temperature or humidity sensor (accessories).
CAV – constant air volume
Manual pre-setting of 2 working points the fans are controlled separately. It is necessary to add two pressure sensors TDP-D as external accessory.
COP – constant pressure
Constant pressure measured by an external pressure sensor TDP-S (accessory). It is necessary to add a pressure sensor TDP-S as an external accessory*.
* To control supply and extract air separately it is necessary to install 2 pressure sensors TDP-S.

Additional information
Single phase (CADB-HE PRO-REG) and three phase models (CADT-HE PRO-REG). Airflows from 400 to 5400 m3/h at 150 Pa of static pressure available.
All versions and models include by-pass. Mounting flexibility provided by the interchangeable side panels.

Static (without fan) high efficiency heat recovery units (up to 92%), with a low profile and light weight enabling them to be installed in false ceilings, designed to work with low consumption fans. Cabinet made of galvanised sheet steel with 10 mm thick polyurethane foam insulation (M1), totally hermetic, rubber gaskets inlet and outlet circular duct connections.
Easy maintenance through access hatch.
High-efficiency PVC counterflow-type heat exchanger.
Condensation drain and inlet and outlet filters (G2 grade) that can be changed without the use of tools.

CADS-HE BP models
Incorporating a motorised by-pass.
The by-pass enables part of the air extracted not to pass through the heat exchanger, when it is desired to cool the premises (with a lower outside temperature than the inside).
The by-pass is reversible, so it can adapt to different airflow layouts, supplying added or extracted air according to the configuration of the ducting system.

Additional information
G4 filters, as an accessory.

Decentralized ventilation unit, with heat recovery, for single rooms and domestic or commercial applications.
Perfect integration in the room thanks to the exchanger located inside the wall.
Heat recovery performance up to 75% (150mm model). The 100mm diameter model can replace existing bathroom extract fans.
Designed for continuous operation, the unit adjusts the airflow proportionally to humidity level, ensuring excellent indoor air quality.

Construction features

• DC motors.
• Efficient centrifugal impellers.
• Tubular heat exchanger.
• Proportional airflow according to humidistat.
• Automatic summer mode.
• Manual boost facility.
• Automatic frost protection.

Whole house heat recovery unit with a high-efficiency heat exchanger up to 92% setting and very low consumption EC motor.
Provides a constant supply of fresh tempered air into the living spaces of a house.
Domeo can communicate with home automation system via Modbus or other gateway protocols. It also enables management of a pre-heating or post heating electric battery.
To optimise energy consumption and air quality, it can be conected to a CO2 or humidity sensor and others. Domeo 210 is fitted with a 100% bypass and it is equipped with M5 or F7 filters at the inlet and with G4 filters at the outlet to protect the heat exchanger.
Includes remote control, allowing adjustment of boost (in RD and APP), by-pass and reset of clogged filters.

Versions
– DOMEO 210 FL 3V EU: Wired remote control.
– DOMEO 210 RD: Wireless remote control (by radiofrequency). Constant airflow motor.
– DOMEO 210 APP: Remote Control by smartphone app. Constant airflow motor.

Features

• Counter-flow heat exchanger with up to 92% thermal efficiency
• Low-consumption EC motor
• Centrifugal backward curved impeller
• Modbus communication
• EPP body
• Nozzles Ø125 mm
• 100% automatic or manual bypass
• Manual boost mode (RD and APP models)
• M5 or F7 (optional) inlet filter
• G4 extract filter

Static (without fan) high efficiency heat recovery units (up to 94%). The low profile and light weight allow installation in ceiling voids, in single dwelling houses or multi-dwelling blocks.
EPP material body with easy access via turnbuckle latches, with pivoting spigots at 90º, G4 filter in the extraction side and F5 filter in the inlet air side.

The CADS-FLEXEO BP version includes automatic or manual 100% bypass, whose design helps to maintain the low profile of the heat recovery unit, thus allowing it to be perfectly installed above false ceilings.
It includes remote control to activate the boost function, the by-pass and the reset filter alarm.

Heat recovery unit with high efficiency heat exchanger up to 94%.
Its main feature is the possibility to be adpated to all configurations. The construction with independent modules allows high flexibility and several fitting options.
It can be mounted on the floor and on the ceiling. On the wall it can be mounted in vertical or horizontal position.
Its low profile (300mm) allows fitting into false ceiling. It can be equipped with a 100% bypass, mantaining its low profile.
To ensure good air quality, is equipped with a F5 filter on the inlet side and, to protect the core, a G4 on the extraction side.
With its remote control, it is possible to manage the boost function, the bypass and the filters reset alarm.

Configuration
-Counter flow heat exchanger.
-EPP body.
-Spigots pivoting to 90º.
-Fan modules x 2
-100% bypass , automatic or manual.
-Manual boost function.
-G4 extract filter.
-F5 inlet filter.
-Wall or ceiling mounting kit
-Opening for access to the core by quarter turn fasteners.