Decorative cooker hoods.

Characteristics:
Capacitor motor.
Professional type aluminium filters.
Speed selector: frontal push button.
Telescopic chimney fitting.
Backdraft shutter.
Reducer for discharge from 150 to 120 mm, for Ø 120 ducts.

Traditional cooker hoods.

Characteristics:
Built-in assembly.
Professional type aluminium filters.
Backdraft shutter.
Upper extraction.

Traditional cooker hoods.

Characteristics:
Built-in assembly.
Hood with telescopic extension filter.
Professional type aluminium filters.
Safety switch.
Backdraft shutter.
Upper extraction.

Capture, extraction and filtration of pollutants and heat in commercial or collective kitchens.
Single backed or double central.
Single modules of length 1000, 1500, 2000, 2500 and 3000 mm.
Without visor or with depth of 1000, 1250, 1500 or 1750 mm.
Height of 400 mm and 500 mm.
Constant hood height for a maximum capture volume.
Self-supporting construction without visible attachment or sharp edges for cleaning without risk of injury.
Side reinforcement, 15/10mm galvanized steel, height 50mm, integrated into the hood, ensuring the rigidity of the assembly.
Setting the level from inside the hood and clip-in fastener caps.
Braced at sensor end for rigid join between two modules, while allowing a large air passage.

Visible faces austenitic stainless steel AISI 304 (1.4301) with a brushed finish SB.
– Central hoods assembled back to back using two hoods backed with partitions.
– Sides without obvious elements such as rivets and studs.
– Rear and upper surfaces in galvanized steel.
– Standard filter galvanized material, stainless steel frame M0397x472x25 mm.
– Stainless steel closure plate.
– Peripheral gutter.
– Drain with stainless steel – threaded plug Gas 1/2.

Packaging: Packaged on pallet in heat-shrink film.

On request
– Rear assembly plate without visible screws and top panel in stainless steel.
– Longer and special lengths available.
– Accessories (ring plate, balancing guillotine damper, waterproof light etc.).
-Motorised hoods, laundries, ovens, comfort, comfort 90/10, 30 to 60% induction, closed filter ceilings, modular ceilings etc.

Decorative cooker hoods.

Characteristics:
Capacitor motor.
Professional type aluminium filters.
Speed selector: frontal push button.
Telescopic chimney fitting.
Backdraft shutter.
Reducer for discharge from 150 to 120 mm, for Ø 120 ducts.

Decorative cooker hoods.

Characteristics:
Capacitor motor.
Professional type aluminium filters.
Speed selector: frontal sliding switch.
Telescopic chimney fitting.
Backdraft shutter.
Reducer for discharge from 150 to 120 mm, for Ø 120 ducts.

Decorative cooker hoods.

Characteristics:
Capacitor motor.
Professional type aluminium filters.
Speed selector: frontal push button.
Telescopic chimney fitting.
Backdraft shutter.
Reducer for discharge from 150 to 120 mm, for Ø 120 ducts.

Decorative cooker hoods.

Characteristics:
Capacitor motor.
Professional type aluminium filters.
Speed selector: frontal push button.
Telescopic chimney fitting.
Backdraft shutter.
Reducer for discharge from 150 to 120 mm, for Ø 120 ducts.

Traditional cooker hoods.

Characteristics:
Synthetic filters.
Backdraft shutter.
Upper or rear extraction.

Traditional cooker hoods.

Characteristics:
Built-in assembly.
Metalic filters.
Backdraft shutter.
Upper extraction.