Filtration box, provided without filter, to mount AFR-N (2 as a maximum).
Suitable to mount outdoors.
Manufactured in galvanized steel.
Circular flanges with tightness joint.
Cover easily removable to quickly replace the filter.

Filtration box (Casing supplied without filter) to install IFR-F filters.
Casing manufactured from galvanised sheet steel, supplied without filter and used to mount IFR filter type. Supplied with standard rectangular flanges.
Access door to mount the IFR filter and to ease filter replacement. Can be fitted in any position. br> Differential pressure switch as accessory (DPS 2-30 and 10-100 pressure switches 20 to 300Pa and 100 to 1000Pa)

Filtration box with IFR-G4 filters incorporated
Casing manufactured from galvanised sheet steel and provided with G4 filter type.
Supplied with standard rectangular flanges.
Access door to ease filter replacement.
Can be fitted in any position.
Working temperature up to 80ºC.
Maximum recommended differential pressure:
200Pa.
Spare filter: IFR .. G4.
As accessory: Differential pressure switch (DPS 2-30 pressure switch – 20 to 300Pa).

Filters to mount in filtration boxes MFL-F

MFR F5
Class F5 (EU5) filters.
Maximum working temperature: 80ºC.
Maximum pressure drop: 300 Pa.

MFR F6
Class F6 (EU6) filters.
Maximum working temperature: 80ºC.
Maximum pressure drop: 350 Pa.

MFR F7
Class F7 (EU7) filters.
Maximum working temperature: 80ºC.
Maximum pressure drop: 400 Pa.

MFR F8
Class F8 (EU8) filters.
Maximum working temperature: 80ºC.
Maximum pressure drop: 400 Pa.

MFR F9
Class F9 (EU9) filters.
Maximum working temperature: 80ºC.
Maximum pressure drop: 400 Pa.

Filters to mount in filtration boxes FLB-N.

Passive filter element, illumination and control.
Fitted in combination with any of the kitchen extractors, supplying a perfect finish to the hood installation, as well as providing illumination and filtration.
Fitted with two switches: 1 – On/Off; 2 – Light switch. It also incorporates an easy to clean metal filter.

Plastic roof terminal cowl designed for circular duct connection and for use ONLY in systems with continuous operation. The CT-P roof terminal kit enable air discharge or supply through a flat or pitched roof.

Rectangular protective peaks for inlet or exhaust.
Inlet models

Rectangular protective peaks for inlet or exhaust.
Exhaust models

Duct connector enables the easy use of flexible ducting with roof cowl terminal.

Models:
Brochal 125
Brochal 150