Radial Centrifugal fans for transportation of materials direct drive – SIGMA https://sigmagroupsa.com Mon, 16 May 2022 08:55:07 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.2 https://sigmagroupsa.com/wp-content/uploads/2022/05/cropped-Sigma-Icon-32x32.png Radial Centrifugal fans for transportation of materials direct drive – SIGMA https://sigmagroupsa.com 32 32 FORWARD CURVED IMPELLER FOR MATERIAL TRANSPORT – DIRECT DRIVE KA Series https://sigmagroupsa.com/product/forward-curved-impeller-for-material-transport-direct-drive-ka-series/ https://sigmagroupsa.com/product/forward-curved-impeller-for-material-transport-direct-drive-ka-series/#respond Mon, 16 May 2022 08:54:47 +0000 https://sigmagroupsa.com/?post_type=product&p=4912

KA-P

Direct drive, single inlet centrifugal fan. Manufactured from steel sheet protected with cataforesis primer + epoxy paint finish. Designed to continuously circulate air from -20ºC up to 60ºC.

Motors
2 or 4 pole, IE 3* high efficiency, three-phase 230/400V 50Hz up to motor size 132 and 400/690V 50Hz for higher motors. IP55, Class F protection.
* From 0,75kW, motor can be IE 2 and controlled by VSD.

On request
• Manufactured from different materials.
• 2-speed motors.
• 60 Hz versions.
• Painted in different RAL colour.
• Fan with no supporting stand (Motor-Flange, Arrangement 5), up to motor size 160.
• High-temperature versions (up to 150ºC) (B versions: with cooling impeller).
• ARRANGEMENT 8: with joint flexible coupling.
• Inspection door, draining, weather seal on scroll and shaft access.
• Welded casing.
• Thermal insulation lagging.

ATEX

ATEX versions
On request, explosion proof versions in accordance with ATEX directive for three phase models:
Ambient temperature -20°C to +60°C, ambient pressure (abs.) 0,8 bar to 1,1 bar according to EN 14986.

• Gas:
2G IIB T2-T3-T4, Motor Exd IIB or ExeII
2G IIB+H2 T2-T3-T4, Motor ExdIIc
3G IIB T2-T3-T4, Motor ExnA (only for 3G zone)
3G IIB+H2 T2-T3-T4, Motor ExnA (only for 3G zone)

• Non-conductive dust
2D IIIB T125°C-T135°C-T195°C-T295°C
3D IIIB T125°C-T135°C-T195°C-T295°C

• Conductive dust (compulsory IP 65 motor):
2D IIIC T125°C-T135°C-T195°C-T295°C
3D IIIC T125°C-T135°C-T195°C-T295°C

Attributes

  • 61-KA-Pbdp506

    Forward curved impeller for material transport

]]> https://sigmagroupsa.com/product/forward-curved-impeller-for-material-transport-direct-drive-ka-series/feed/ 0 FORWARD CURVED IMPELLER FOR MATERIAL TRANSPORT – DIRECT DRIVE KB Series https://sigmagroupsa.com/product/forward-curved-impeller-for-material-transport-direct-drive-kb-series/ https://sigmagroupsa.com/product/forward-curved-impeller-for-material-transport-direct-drive-kb-series/#respond Mon, 16 May 2022 08:54:47 +0000 https://sigmagroupsa.com/?post_type=product&p=4913

KB-P

Direct drive, single inlet centrifugal fan. Manufactured from steel sheet protected with cataforesis primer + epoxy paint finish. Designed to continuously circulate air from -20ºC up to 60ºC.

Motors
2 or 4 pole, IE 3* high efficiency, three-phase 230/400V 50Hz up to motor size 132 and 400/690V 50Hz for higher motors. IP55, Class F protection.
* From 0,75kW, motor can be IE 2 and controlled by VSD.

On request
• Manufactured from different materials.
• 2-speed motors.
• 60 Hz versions.
• Painted in different RAL colour.
• Fan with no supporting stand (Motor-Flange, Arrangement 5), up to motor size 160.
• High-temperature versions (up to 150ºC) (B versions: with cooling impeller).
• ARRANGEMENT 8: with joint flexible coupling.
• Inspection door, draining, weather seal on scroll and shaft access.
• Welded casing.
• Thermal insulation lagging.

ATEX

ATEX versions
On request, explosion proof versions in accordance with ATEX directive for three phase models:
Ambient temperature -20°C to +60°C, ambient pressure (abs.) 0,8 bar to 1,1 bar according to EN 14986.

• Gas:
2G IIB T2-T3-T4, Motor Exd IIB or ExeII
2G IIB+H2 T2-T3-T4, Motor ExdIIc
3G IIB T2-T3-T4, Motor ExnA (only for 3G zone)
3G IIB+H2 T2-T3-T4, Motor ExnA (only for 3G zone)

• Non-conductive dust
2D IIIB T125°C-T135°C-T195°C-T295°C
3D IIIB T125°C-T135°C-T195°C-T295°C

• Conductive dust (compulsory IP 65 motor):
2D IIIC T125°C-T135°C-T195°C-T295°C
3D IIIC T125°C-T135°C-T195°C-T295°C

Attributes

  • 61-KB-Pbdp506

    Forward curved impeller for material transport

]]> https://sigmagroupsa.com/product/forward-curved-impeller-for-material-transport-direct-drive-kb-series/feed/ 0 RADIAL IMPELLER FOR MATERIAL TRANSPORT – DIRECT DRIVE KC Series https://sigmagroupsa.com/product/radial-impeller-for-material-transport-direct-drive-kc-series/ https://sigmagroupsa.com/product/radial-impeller-for-material-transport-direct-drive-kc-series/#respond Mon, 16 May 2022 08:54:47 +0000 https://sigmagroupsa.com/?post_type=product&p=4914

KC-R

Direct drive, single inlet centrifugal fan. Manufactured from steel sheet protected with cataforesis primer + epoxy paint finish. Designed to continuously circulate air from -20ºC up to 60ºC.

Motors
2 or 4 pole, IE 3* high efficiency, three-phase 230/400V 50Hz up to motor size 132 and 400/690V 50Hz for higher motors. IP55, Class F protection.
* From 0,75kW, motor can be IE 2 and controlled by VSD.

On request
• Manufactured from different materials.
• 2-speed motors.
• 60 Hz versions.
• Painted in different RAL colour.
• Fan with no supporting stand (Motor-Flange, Arrangement 5), up to motor size 160.
• High-temperature versions (up to 150ºC) (B versions: with cooling impeller).
• ARRANGEMENT 8: with joint flexible coupling.
• Inspection door, draining, weather seal on scroll and shaft access.
• Welded casing.
• Thermal insulation lagging.

ATEX

ATEX versions
On request, explosion proof versions in accordance with ATEX directive for three phase models:
Ambient temperature -20°C to +60°C, ambient pressure (abs.) 0,8 bar to 1,1 bar according to EN 14986.

• Gas:
2G IIB T2-T3-T4, Motor Exd IIB or ExeII
2G IIB+H2 T2-T3-T4, Motor ExdIIc
3G IIB T2-T3-T4, Motor ExnA (only for 3G zone)
3G IIB+H2 T2-T3-T4, Motor ExnA (only for 3G zone)

• Non-conductive dust
2D IIIB T125°C-T135°C-T195°C-T295°C
3D IIIB T125°C-T135°C-T195°C-T295°C

• Conductive dust (compulsory IP 65 motor):
2D IIIC T125°C-T135°C-T195°C-T295°C
3D IIIC T125°C-T135°C-T195°C-T295°C

Attributes

  • 61-KC-Rbdp506

    Radial impeller

]]> https://sigmagroupsa.com/product/radial-impeller-for-material-transport-direct-drive-kc-series/feed/ 0 RADIAL IMPELLER FOR MATERIAL TRANSPORT – DIRECT DRIVE KM Series https://sigmagroupsa.com/product/radial-impeller-for-material-transport-direct-drive-km-series/ https://sigmagroupsa.com/product/radial-impeller-for-material-transport-direct-drive-km-series/#respond Mon, 16 May 2022 08:54:47 +0000 https://sigmagroupsa.com/?post_type=product&p=4915

KM-R

Direct drive, single inlet centrifugal fan. Manufactured from steel sheet protected with cataforesis primer + epoxy paint finish. Designed to continuously circulate air from -20ºC up to 60ºC.

Motors
2 or 4 pole, IE 3* high efficiency, three-phase 230/400V 50Hz up to motor size 132 and 400/690V 50Hz for higher motors. IP55, Class F protection.
* From 0,75kW, motor can be IE 2 and controlled by VSD.

On request
• Manufactured from different materials.
• 2-speed motors.
• 60 Hz versions.
• Painted in different RAL colour.
• Fan with no supporting stand (Motor-Flange, Arrangement 5), up to motor size 160.
• High-temperature versions (up to 150ºC) (B versions: with cooling impeller).
• ARRANGEMENT 8: with joint flexible coupling.
• Inspection door, draining, weather seal on scroll and shaft access.
• Welded casing.
• Thermal insulation lagging.

ATEX

ATEX versions
On request, explosion proof versions in accordance with ATEX directive for three phase models:
Ambient temperature -20°C to +60°C, ambient pressure (abs.) 0,8 bar to 1,1 bar according to EN 14986.

• Gas:
2G IIB T2-T3-T4, Motor Exd IIB or ExeII
2G IIB+H2 T2-T3-T4, Motor ExdIIc
3G IIB T2-T3-T4, Motor ExnA (only for 3G zone)
3G IIB+H2 T2-T3-T4, Motor ExnA (only for 3G zone)

• Non-conductive dust
2D IIIB T125°C-T135°C-T195°C-T295°C
3D IIIB T125°C-T135°C-T195°C-T295°C

• Conductive dust (compulsory IP 65 motor):
2D IIIC T125°C-T135°C-T195°C-T295°C
3D IIIC T125°C-T135°C-T195°C-T295°C

Attributes

  • 61-KM-Rbdp506

    Forward curved impeller for material transport

]]> https://sigmagroupsa.com/product/radial-impeller-for-material-transport-direct-drive-km-series/feed/ 0 RADIAL CURVED IMPELLER FOR MATERIAL TRANSPORT – DIRECT DRIVE K Series https://sigmagroupsa.com/product/radial-curved-impeller-for-material-transport-direct-drive-k-series/ https://sigmagroupsa.com/product/radial-curved-impeller-for-material-transport-direct-drive-k-series/#respond Mon, 16 May 2022 08:54:25 +0000 https://sigmagroupsa.com/?post_type=product&p=4905

K-R

Direct drive, single inlet centrifugal fan. Manufactured from steel sheet protected with cataforesis primer + epoxy paint finish. Designed to continuously circulate air from -20ºC up to 60ºC.

Motors
2 pole, IE 3* high efficiency, three-phase 230/400V 50Hz up to motor size 132 and 400/690V 50Hz for higher motors. IP55, Class F protection.
* From 0,75kW, motor can be IE 2 and controlled by VSD.

On request
• Manufactured from different materials.
• 2-speed motors.
• 60 Hz versions.
• Painted in different RAL colour.
• Fan with no supporting stand (Motor-Flange, Arrangement 5), up to motor size 160.
• High-temperature versions (up to 150ºC) (B versions: with cooling impeller).
• ARRANGEMENT 8: with joint flexible coupling.
• Inspection door, draining, weather seal on scroll and shaft access.
• Welded casing.
• Thermal insulation lagging.

ATEX

ATEX versions
On request, explosion proof versions in accordance with ATEX directive for three phase models:
Ambient temperature -20°C to +60°C, ambient pressure (abs.) 0,8 bar to 1,1 bar according to EN 14986.

• Gas:
2G IIB T2-T3-T4, Motor Exd IIB or ExeII
2G IIB+H2 T2-T3-T4, Motor ExdIIc
3G IIB T2-T3-T4, Motor ExnA (only for 3G zone)
3G IIB+H2 T2-T3-T4, Motor ExnA (only for 3G zone)

• Non-conductive dust 
2D IIIB T125°C-T135°C-T195°C-T295°C
3D IIIB T125°C-T135°C-T195°C-T295°C

• Conductive dust (compulsory IP 65 motor):
2D IIIC T125°C-T135°C-T195°C-T295°C
3D IIIC T125°C-T135°C-T195°C-T295°C

Attributes

  • 61-K-Rbdp506

    Radial impeller

]]> https://sigmagroupsa.com/product/radial-curved-impeller-for-material-transport-direct-drive-k-series/feed/ 0